ďťż
 
 
   [+]Napęd DVD-RW - z błędami I/O lub całkowicie niewykrywalny
 
 

Tematy

 
    
 

 

 

 

[+]Napęd DVD-RW - z błędami I/O lub całkowicie niewykrywalny





Dalik - 16-01-2010 15:34
Od czasu zainstalowania Sida mam problemy ze zgrywaniem płyt CD do formatu mp3, tak więc chciałem się upewnić czy to nie wina napędu.

Podłączyłem inny napęd (w ogóle coś z nim było nie tak) więc z powrotem włożyłem moją nagrywarkę i podczas startu mam takie błędy (wycinek z pliku /var/log/dmesg)
5.885325] EDAC MC: Ver: 2.1.0 Nov 16 2009
[    5.899932] EDAC amd64_edac:  Ver: 3.2.0 Nov 16 2009
[    5.900347] EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization
[    5.904360] EDAC MC: Rev F or later detected
[    5.904443] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[    5.904467] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[    5.911860] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[    5.911984] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[    5.912106] hdb: possibly failed opcode: 0xa0
[    5.924453] end_request: I/O error, dev hdb, sector 0
[    5.924488] Buffer I/O error on device hdb, logical block 0
[    5.924519] Buffer I/O error on device hdb, logical block 1
[    5.924549] Buffer I/O error on device hdb, logical block 2
[    5.924578] Buffer I/O error on device hdb, logical block 3
[    5.924607] Buffer I/O error on device hdb, logical block 4
[    5.924635] Buffer I/O error on device hdb, logical block 5
[    5.924671] Buffer I/O error on device hdb, logical block 6
[    5.924707] Buffer I/O error on device hdb, logical block 7
[    5.924743] Buffer I/O error on device hdb, logical block 8
[    5.924778] Buffer I/O error on device hdb, logical block 9
[    5.925399] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[    5.925525] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[    5.925658] hdb: possibly failed opcode: 0xa0
[    5.924453] end_request: I/O error, dev hdb, sector 0
[    5.924488] Buffer I/O error on device hdb, logical block 0
[    5.924519] Buffer I/O error on device hdb, logical block 1
[    5.924549] Buffer I/O error on device hdb, logical block 2
[    5.924578] Buffer I/O error on device hdb, logical block 3
[    5.924607] Buffer I/O error on device hdb, logical block 4
[    5.924635] Buffer I/O error on device hdb, logical block 5
[    5.924671] Buffer I/O error on device hdb, logical block 6
[    5.924707] Buffer I/O error on device hdb, logical block 7
[    5.924743] Buffer I/O error on device hdb, logical block 8
[    5.924778] Buffer I/O error on device hdb, logical block 9
[    5.925399] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[    5.925525] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[    5.925658] hdb: possibly failed opcode: 0xa0
[    5.928526] end_request: I/O error, dev hdb, sector 0
[    6.291866] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[    6.291998] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[    6.292136] hdb: possibly failed opcode: 0xa0
[    6.296666] end_request: I/O error, dev hdb, sector 0
[    6.297177] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[    6.297304] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[    6.297436] hdb: possibly failed opcode: 0xa0
[    6.300408] end_request: I/O error, dev hdb, sector 0
[    6.300910] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[    6.301037] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[    6.301169] hdb: possibly failed opcode: 0xa0
[    6.304874] end_request: I/O error, dev hdb, sector 0
[    6.741234] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Kolejnym razem system uruchomił się bez błędu, jednak nie widzi napędu i wyświetla błąd:

wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation. Co jest grane?



fnmirk - 16-01-2010 17:47
Zresetowałeś regułki udev?
Wyczyść zawartość pliku: /etc/udev/rules.d/70-persistent-cd.rules Zrestartuj komputer.



Dalik - 16-01-2010 19:44
Wyczyszczałem, kasowałem, restartowałem i nic.

edit.
Odłączyłem nagrywarkę, uruchomiłem system - taki błąd jak powyżej.
Następnie podłączyłem nagrywarkę, uruchomiłem system i jak na razie działa.

/etc/udev/rules.d/70-persistent-cd.rules wygląda tak:
File Edit Options Buffers Tools Help                                                                                                         
# This file was automatically generated by the /lib/udev/write_cd_rules
# program, probably run by the cd-aliases-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line
# and set the $GENERATED variable.

# _NEC_DVD_RW_ND-3520AW (pci-0000:00:06.0-ide-0:1)
# _NEC_DVD_RW_ND-3520AW (pci-0000:00:06.0)
# _NEC_DVD_RW_ND-3520AW (pci-0000:00:06.0)
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:06.0", SYMLINK+="cdrom", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:06.0", SYMLINK+="cdrw", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:06.0", SYMLINK+="dvd", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:06.0", SYMLINK+="dvdrw", ENV{GENERATED}="1"
  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • minister.pev.pl

  •  

     


     

     
    Copyright 2003. MĂłj serwis